30 Years
Basket is empty!
Total number of items in your basket
0
Subtotal (Excluding VAT & delivery)
Delivery costs may vary depending on location
£0.00
Go to basket

Spark Plug Caps (15 results)

Electrical
Ignition
Spark Plugs
Shop by Colour
Shop by Brand
Shop by Price
  • Champion Right Angle Spark Plug Cap - Suppressed WCX600
    Champion Right Angle Spark Plug Cap - Suppressed WCX600
    £6.95 ex. VAT

    Product description

    This Champion Plug Cap is an accurate reproduction of a type that was fitted to Jaguar MkI, MkII, E Types 3.8 & 4.2, as well as motorcycles etc..Marked as having a resistance of 10k ohms. Care must be taken to ensure that these...

    More Info
  • Champion Right Angle Waterproof Spark Plug Cap - Suppressed
    Champion Right Angle Waterproof Spark Plug Cap - Suppressed
    £6.50 ex. VAT

    Product description

    Champion Spark Plug Cap. This type of plug cap screws onto the ignition wire. Made from rubber with CHAMPION moulded into the top. Suppressed and should not be used with spark plugs with resistors fitted

    More Info
  • Champion Straight Spark Plug Cap HTC2
    Champion Straight Spark Plug Cap HTC2
    £3.89 ex. VAT

    Product description

    Traditional straight and unsupressed Champion Spark Plug cap HTC2, commonly found on many cars of the 1950's and 60's that require a straight plug cap

    More Info
  • Daimler V8 Spark Plug Cap
    Daimler V8 Spark Plug Cap
    £10.32 ex. VAT

    Product description

    Daimler V8 engines, both 2.5 and 4.5 litre variants require a special plug cap to reach the spark plug, as the plug is deep-set in the cylinder head. This particular plug cap requires a conventional cap to then connect your plug lead

    More Info
  • Distributor Cap HT Cover - CYB350/54953674
    Distributor Cap HT Cover - CYB350/54953674
    £0.75 ex. VAT

    Product description

    Cover for HT terminals on distributor caps. Lucas part numbers 54953674 or CYB350. Made to fit push on terminals only.

    More Info
  • Distributor Cap HT Lead Termnial Cover - CYB351 or 54953571
    Distributor Cap HT Lead Termnial Cover - CYB351 or 54953571
    £0.75 ex. VAT

    Product description

    Cover for the crimp on right angled terminal to fit on the distributor cap end of the plug lead. Lucas cross reference 54953571 or CYB351

    More Info
  • Hypalon Spark Plug Cover
    Hypalon Spark Plug Cover
    £1.23 ex. VAT

    Product description

    Use with the straight plug connector to finish your own plug leads.. Strip the ignition wire, fit to connector, bend it back, crimp the connector over the wire with a pliers, bend the connector to the angle required and then push it...

    More Info
  • KLG Right Angled Spark Plug Cap - Not Suppressed
    KLG Right Angled Spark Plug Cap - Not Suppressed
    £3.40 ex. VAT

    Product description

    Right angled rubber spark plug cap - not suppressed, so ideally suited for use with magnetos or on ingition systems where suppression s not required. Screws onto the ignition wire and is a push fit onto the plug.

    More Info
  • NGK Right Angle Waterproof Spark Plug Cap - Not Suppressed
    NGK Right Angle Waterproof Spark Plug Cap - Not Suppressed
    £2.50 ex. VAT

    Product description

    NGK Right Angled Spark Plug Cap - moulded from plastic to include NGK branding on the top, this plug cap is supplied with a rubber waterproofing boot to fit around both the cable joint and the plug itself. The cap grips the fine...

    More Info
  • NGK Right Angle Waterproof Spark Plug Cap - Suppressed
    NGK Right Angle Waterproof Spark Plug Cap - Suppressed
    £3.88 ex. VAT

    Product description

    NGK Right Angled Spark Plug Cap - moulded from plastic to include NGK branding on the top, this plug cap is supplied with a rubber waterproofing boot to fit around both the cable joint and the plug itself. The cap grips the fine...

    More Info
  • Plain Metal Spark Plug Connector 189253
    Plain Metal Spark Plug Connector 189253
    £3.14 ex. VAT

    Product description

    Plain spark plug connector designed to be fitted beneath the screw on cap on your plug. For use with copper cored plug wire, which should be soldered throught the small holes in the connector. A small piece of heat-shrink over the point...

    More Info
  • PVC Right Angled Spark Plug Cover
    PVC Right Angled Spark Plug Cover
    £1.50 ex. VAT

    Product description

    Spark Plug Terminal Cover for use with the right angled tinned steel plug connector. Ideal for use when making up your own ignition leads where a non suppressed plug cap is required. Strip the ignition wire, fit to connector, bend it...

    More Info
  • Right Angled Spark Plug Connector
    Right Angled Spark Plug Connector
    £1.90 ex. VAT

    Product description

    For use with the Right Angled Spark Plug Cover. Strip the ignition wire, fit it into the connector, bend it back, crimp the connector over the wire with a pliers and push it into the cover. For added peace of mind you can always apply a...

    More Info
  • Straight Spark Plug Cap
    Straight Spark Plug Cap
    £2.15 ex. VAT

    Product description

    Straight Spark Plug Cap made from black phenolic plastic. Unsurpressed. Snap fit onto plug top. 69.5 mm long.

    More Info
  • Straight Suppressed Spark Plug Cap
    Straight Suppressed Spark Plug Cap
    £2.55 ex. VAT

    Product description

    Straight Spark Plug Cap made from brown phenolic plastic. Contains 5k ohm resistor. Snap fit onto plug top. 69.5 mm long. A non-surpressed version is also available

    More Info

Spark Plug Caps