Product description

A gel that kills and prevents battery corrosion. The best way to use it is to undo the battery clamp, clean everything up and smear this gel all over the clamp and the battery post to prevent future corrosion. Also smear it over any...

Product description

This battery box is moulded from ABS and supplied complete with lid and quick release fasteners, internal dimensions are length 260mm x width 180mm x depth 230mm. The manufacturers call this 'carbon look'. Also available in red, refer to...

Product description

This battery box is moulded from ABS and supplied complete with lid and quick release fasteners. Internal dimensions are length 260mm x width 180mm x depth 230mm. Also available in black, refer to 080.105

Product description

Product description

Black coated steel clamp, fits MG Midget and Austin Healey Sprite up to 1965. Hexagon nut fixing. Distance between holes 340mm. Length of J bolts approx 102mm. Original Equipment Part No. AHA6934K

Product description

Steel clamp, fits MG Midget and Austin Healey Sprite after 1965. Hexagon nut fixing. Distance between holes 268mm. Length of J bolts approx 102mm

Product description

Black coated steel clamp, fits MGB with 12 volt battery. Hexagon nut fixing. Distance between holes 268mm. Length of J bolts 225mm

Product description

Black coated steel clamp, fits Morris Minor. Wingnut fixing. Distance between holes 340mm. Length of J bolts 135mm, supplied with special collars and spring washers

Product description

Black coated steel clamp, fits Triumph Spitfire. Wingnut fixing. Distance between holes 268mm. Length of J bolts 130mm

Product description

Black coated steel clamp, fits Triumph TR3/4/4A/250. Wingnut fixing. Distance between holes 340mm. Length of J bolts 150mm

Product description

A galvanised mild steel clamp, fits batteries up to 335 mm long, Has butterfly wing nut fixing. Can be cut to size. For clamps to suit specific cars refer to 080.837,080.838 & 80.839

Product description

This Battery Mat is placed underneath the battery to assist in overcoming the familiar problem of rusting of steel in the vicinity of the battery. It is made of polypropylene felt, impregnated with an acid neutralising chemical which is...

Product description

If you need to connect something temporarily to a battery then a good pair of crocodile clips is essential. This is made from plated steel and is 76 mm long with a 32 mm jaw opening and a 6.4 mm Lucar connection for the lead. Maximum...

Product description

If you need to connect something temporarily to a battery then a good pair of crocodile clips is essential. This is made from plated steel and is 76 mm long with a 32 mm jaw opening and a screw connection for the lead. Maximum...

Product description

If you need to connect something temporarily to a battery then a good pair of crocodile clips is essential. This is made from plated steel and is 102 mm long with a 50 mm jaw opening and a screw connection for the lead. Maximum...

Product description

It is not always possible to get a battery of a make that would have been originally fitted to your classic car, but you can get this Lucas adhesive battery label to dress up your (modern) battery.

Product description

A Set of three LUCAS adhesive Battery Labels as shown. The top one is 133 mm x 57 mm, the middle one is 120 mm x 60 mm and the bottom one is 106 mm x 33 mm

Product description

On some cars the battery is very visible when you raise the bonnet (hood) and modern batteries look out of place. You can redeem this situation by using this moulded plastic panel with the Lucas lion logo, by sticking it onto the side of...