Product description

Quality reproduction of the Lucas combined ignition and starter switch with left position for auxiliary circuits such as radio. With chrome bezel and Lucar connectors. Requires 19.6 mm diameter hole. Rated at 5 amps for Ignition, 16 amps...

Product description

Military type combined Ignition and Lighting Switch, offering 6 different positions on the lighting switch, no doubt to utilise a varied selection of the lights on the vehicle, or indeed all of them! Flange mounting. Supplied without...

Product description

Combined Ignition and Lighting Switch for motorcycles, but could also be used on a car dashboard. Supplied with keys.

Product description

Combined ignition and starter switch with chrome finishing surround and Lucar connectors. Requires 18 mm diameter hole. Supplied with two keys. This Switch has four positions : 1,...

Product description

Reproduction of a Lucas type Ignition Key

Product description

Ignition Switch, offering Off & On poitions only, with chrome nut bezel and Lucar connectors. Requires hole through panel 19.6 mm diameter. Supplied without Barrel and Key Assembly, which you should order separately if required. Rated at...

Product description

This is the switch insert to fit to the end of certain steering column locks. As fitted to MGB from 1972-1980 and MG Midget Mk III from 1972 onwards and 1500

Product description

Ignition and Lighting Switch, OFF-SIDE-HEAD. Requires 52 mm diameter hole and secures with clip included. Screw type connections for the wires. Two keys supplied. This is a quality reproduction of an early Lucas PLC type switch where the...

Product description

Original Lucas type combined ignition and starter switch with left position for auxiliary circuits such as radio. With chrome bezel and Lucar connectors. Requires 19.6 mm diameter hole. Rated at 5 amps for Ignition, 16 amps for Starter...

Product description

Product description

Lucas type ignition and starter switch with chrome bezel and Lucar connectors. Requires 19.6 mm diameter hole. Supplied without Barrel & Key Assembly which should be ordered separately if required, otherwise you can transfer the key...

Product description

Lucas type 3 position ignition and starter switch. With chrome bezel and Lucar connectors. Requires 19.6 mm diameter hole. This switch was fitted to the Jaguar E Type Series 1, 420, 420G and Daimler Sovereign, V8 250 Saloon and the...

Product description

Replacement barrel and key to fit Lucas ignition switches. Retained in the switch body by a small sprung pin at the end of the key barrel. You will notice a corresponding hole in the outer case of the switch body, through which a small...

Product description

Combined Ignition and Lighting Switch as fitted to a variety of British cars, including Austin Healey Sprite and Austin A40 Countryman. Supplied without Barrel & Key Assembly, which you should order separately if required. A couple of...

Product description

Lighting knob to fit the PRS3 combined Ignition and lighting switch.

Product description

Lighting knob to fit the PRS3 combined Ignition and lighting switch.

Product description

Aluminium Panel 112 mm wide x 60 mm tall with Toggle Switch for Ignition, Push Button for Start and 2 Toggle Switches for Accessories. The Ignition Switch has a flip-up cover which has to be lifted before the Toggle Switch can be...

Product description

Aluminium Panel 67 mm wide x 96 mm tall with Toggle Switch for Ignition, Red Ignition Warning Light and Push Button for Start. The Toggle Switch has a flip-up cover which has to be lifted before the Toggle Switch can be switched on....