Product description

A round black knob marked with the letter 'C' that can be fitted to any Lucas switch with a hexagonal shaft, whether it be of the rotary or push-pull variety. Secured by the sprung button on the shaft which fits into a corresponding hole...

Product description

A round black knob marked with the letter 'F' that can be fitted to any Lucas switch with a hexagonal shaft, whether it be of the rotary or push-pull variety. Secured by the sprung button on the shaft which fits into a corresponding hole...

Product description

A round black knob marked with the letter 'H' that can be fitted to any Lucas switch with a hexagonal shaft, whether it be of the rotary or push-pull variety. Secured by the sprung button on the shaft which fits into a corresponding hole...

Product description

A round black knob marked with the letter 'L' that can be fitted to any Lucas switch with a hexagonal shaft, whether it be of the rotary or push-pull variety. Secured by the sprung button on the shaft which fits into a corresponding hole...

Product description

A round black knob marked with the letter ''P'' and an arrow pointing Clockwise.that can be fitted to any Lucas switch with a hexagonal shaft, whether it be of the rotary or push-pull variety. Secured by the sprung button on the shaft...

Product description

A round black knob marked with the letter 'S' that can be fitted to any Lucas switch with a hexagonal shaft, whether it be of the rotary or push-pull variety. Secured by the sprung button on the shaft which fits into a corresponding hole...

Product description

A round black knob marked with the letter 'W' that can be fitted to any Lucas switch with a hexagonal shaft, whether it be of the rotary or push-pull variety. Secured by the sprung button on the shaft which fits into a corresponding hole...

Product description

H/S/Off knob - cream, 1951-61

Product description

Product description

Original style Push Knob for operating the Screen Washers of the MGA. The knob is marked 'Push' and 'Screen Washer' which is engraved and filled white. (Regret we are unable to supply the actual switch)

Product description

Knob with headlamp symbol, which is for use on switches with a hexagonal shaft. This type of switch knob was used on MGB from 1966-71 and Triumph TR4

Product description

Lettered PANEL with arrows as shown. As fitted to late TR3a's. Fits the rotary rheostat switch. We keep a range of knobs of the type fitted to the earlier TR's

Product description

Off-on switch. Requires 9.5 mm diameter hole. Supplied with a plain black knob. which is held in place by a srung pin. The knob can be swapped for one that is maked with a letter or a function, it must be a type suitable for a hexagonal...

Product description

A comprehensive set of eleven replacement switch Knobs for the MGA. Nine fit hexagonal shafts - plain, F, L, P (with arrow for panel rheostat), W, C, S and two domed knobs. Plus the direction indicator knob and the blower B knob. Most of...

Product description

Off-on. Requires 11.5mm diameter hole. Knob has a bulb within which illuminates when the switch is on. Rated at 16 amps on 12 volt systems. The knob unscrews to enable the switch to be fitted through a panel, and also allows the bulb to...

Product description

Off-on. Requires 11.5mm diameter hole. Knob has a bulb within which illuminates when the switch is on. Rated at 16 amps on 12 volt systems. The knob unscrews to enable the switch to be fitted through a panel, and also allows the bulb to...

Product description

Off-on. Requires 11.5mm diameter hole. Knob has a bulb within which illuminates when the switch is on. Rated at 16 amps on 12 volt systems. The knob unscrews to enable the switch to be fitted through a panel, and also allows the bulb to...

Product description

Off - pull on - turn on - turn on. Hexagon shaft supplied without a knob. Chrome nut. As fitted to Rolls-Royce, Bentley and others for panel/dash lighting. Knobs listed in this section for hexagon shafts can be used with this Switch.