Black coated steel clamp, fits Morris Minor. Wingnut fixing. Distance between holes 340mm. Length of J bolts 135mm, supplied with special collars and spring washers
A completely new Distributor with new cap, rotor, contacts, condenser, bearings/bushes, oil seals and vacuum unit, assembled in the UK with weights and springs set to the original advance curve and the vacuum unit set to the original...
Specifically engineered to fit and cool your Morris Minor. Supplied complete with quality electric fan and all neccesary brackets, fixings, hose clips and connectors to provide a complete installation on your Minor. Fits without any...
For Morris Marina. Lucar connectors at rear. New old stock mostly in Lucas boxes. We have limited numbers available
Polypropylene for indoor use, it drapes over your car covering it completely, protecting it from dirt and with the fabric being breathable the car is also protected from dampness while it is in the garage. Elasticated hems retain the...
As fitted to early Morris Minor. The back body is shaped to allow the lamp to sit on the contour of the rear wing. This is the lamp for the left hand side of the car.
As fitted to early Morris Minor. The back body is shaped to allow the lamp to sit on the contour of the rear wing. This is the lamp for the right hand side of the car,
Lindsay Porter gives a basic history of all models of the Minor, then advises how to find a good example and set about restoration work. Particular attention is given to bodywork repairs (including the timberwork of the Traveller)...
Haynes owners workshop manual covering Saloon, Convertible and Estate (Traveller), 1956 - 1971, up to K. Engines of 948cc and 1098cc
Rear Brake Cylinder for either side of Morris Minor 1000 from 1961 to 1967. Original Equipment Part No. GWC1116
Made by the original manufacturer, chrome plated on steel with 'M' stamped in the centre
Set of four Brake Shoes for the two front drum brakes of the Morris Minor from 1957 to 1962. These Brake Shoes are 7 in diameter. They are made in England by MINTEX and are asbestos free
Set of four Brake Shoes for the two front drum brakes of the Morris Minor from 1962 to 1971. These Brake Shoes are 8 in diameter and are asbestos free. The Original Equipment Part No. was GBS705
Handle is 139mm (5 1/2') overall width, two studs are at approx 32mm (1.25') centres. Shaft is 5/16' square and 40mm (1.60') long. Supplied with two keys
Column mounted indicator switch with green lamp on the end. As fitted to the Morris Minor 1967-71
For Lucas 14.8mm splined shafts, 240mm long. As fitted to the Morris 1000. Cranked left. Stainless steel. For cranked right refer to 040.311
For Lucas 14.8mm splined shafts, 240mm long. As fitted to the Morris 1000. Cranked right. Stainless steel. For cranked left refer to 010.312