Use with the plug in Kit 080.041 to make up an extension lead for your 12 volt inspection lamp
Ferrule screws on to Socket 080.650 to stop it falling out. Maximum load 5 amps at 12 volts
For use with Socket 080.650. Maximum load 5 amps at 12 volts
Can be used with a standard cigar lighter socket or a DIN plug. Inside it has two terminals, and a fuse. To convert it to a DIN plug you turn and remove the red part on the end. We supply it with two ring terminals to assist with wiring...
Plug for 12v inspection lamp or similar. Use with Sockets CAB189. You can also use 770419, which is a 'flying' socket, to make up an extension lead for your inspection lamp. It should be noted that the two pins are the same...
Plug and Socket with cover, for inspection lamp or other equipment or charging. Requires 19 mm diameter hole in dashboard
A nice small Plug and Socket. The Socket requires a 12 mm hole in the dashboard and the top of the plug is only 25 mm diameter
Socket suitable for metal panels. Requires 8mm diameter hole