Product description

Superb Map Reading Lamp with chrome finish, for mounting on the dashboard. Adjustable, with built in switch. These lamps were originally made by Wipac and fitted in Jaguars and coachbuilt Rolls-Royces. If you would like a brighter...

Product description

Polished chrome pull out dash lamp. 2 inches overall diameter x 2 1/4 inches long when pulled out from the dash. Surface mounted via the flange around the body. Supplied without a bulb. Can be used with either 6 or 12 volt bulbs.

Product description

A surface mounted dashlamp, made from a polished chrome finished centre tube, with clear window and bakelite ends, held together and mounted via a polished bracket. 3 1/2 inches long. Sold without a bulb, which needs to be ordered...

Product description

Chrome dash or number plate lamp acorn style. These lamps are often used to illuminate stop watches mounted on a dash board.

Product description

Small Interior Lamp 66 x 30 x 25 mm. 12 volt. No Switch. Installs on flat surface using the two screws supplied at 51 mm centres. Could also be used as a numberplate lamp. This lamp is fitted with a 12 volt capless bulb (for a spare...

Product description

Has a 12 volt 10 watt halogen bulb which gives a brilliant light for reading pacenotes and maps. For mounting under the door seal on the door frame. Pivots to get the light just where you want it. Supplied with 1 1/2 metres of flex....

Product description

As fitted to Rover P5 and P5B. With built in switch.

Product description

Lens only for Rolls-Royce Silver Shadow Glove Box Lamp. Moulded in heat resisting clear plastic using the ORIGINAL tooling.

Product description

Spare lens for L562/56094 Interior or Under Bonnet Lamp

Product description

Flexiible map reading lamp with integral switch. All black 12 volt lamp. 18 inches (457 mm) long. Light beam comes from the end of the Lamp. Includes all necessary fixings and a stowage clip to retein the lamp securely when not in use. A...

Product description

Flexiible map reading lamp with integral switch. All black 12 volt lamp. 18 inches (457 mm) long. Light beam comes from the side of the lamp. Includes all necessary fixings and a stowage clip to retein the lamp securely when not in use....

Product description

Post light, using LED technology to provide a suitable light to illuminate your dash instrument or stopwatches etc. The overall length is 65mm and the body itself is 28mm. This can be extended by 17mm using the optional extension piece.

Product description

Extension part for the LED Post Light. This part is used to extend the lamp body by 17mm.

Product description

Extension for traditional Post Light, extends body by 22mm.

Product description

For illuminating Stopwatches etc. Illumination by LED (light emitting diode). Requires 8mm hole in wood or metal dashboard. 12.5mm diameter and 14mm in front of dashboard. Stainless steel

Product description

Product description

Chrome dash lamp designed for fitting to a panel, 1 1/8 inches diameter. This type of lamp was fitted from the end of the 1920's.