Basket is empty!

Brantz

In the sixties, serious competitors in rallying used trip meters which were 100% mechanical to improve their navigation and finish higher up the finishing order, and some rally regulations...Read more

Brantz (12 results)

Shop by Size
Shop by Price
  • Brantz International 1 Tripmeter
    £105.84 ex. VAT

    Product description

    The International 1 Pro is a basic single readout tripmeter; ideal for beginner road rallying and club level stage rallying. It features a Single red LED Display which is approx 15mm high for easy visibility, and can be simply calibrated...

    More Info
  • Brantz International 2 'Pro' Tripmeter
    £141.12 ex. VAT

    Product description

    Offering all the features of the International 1 Tripmeter, this unit adds a second display showing intermediate distance as well as a total, together with a remote reset button allowing the Navigator to Zero the intermediate The second...

    More Info
  • Brantz International 2 S Pro Tripmeter
    £190.00 ex. VAT

    Product description

    Offering all the features of both the International 1 and 2 Tripmeters, this unit adds a third display showing selectable speed or average speed, as well as intermediate distance and a total, together with a remote reset button allowing...

    More Info
  • Brantz Speedtable
    £155.63 ex. VAT

    Product description

    Use the four mechanical push switches to set the average speed in either mph or kph to one decimal place, whereupon the readout gives you the reading which is required on your tripmeter to average that speed. Press Z at the start and...

    More Info
  • Plug & Socket Kit for Brantz Tripmeters
    £28.01 ex. VAT

    Product description

    If you wish to remove your Tripmeter from your vehicle, or use it in more than one vehicle, it is possible to install this wiring kit, such that you fit the plug to the Tripmeter and the socket to a panel in the vehicle, thus allowing...

    More Info
  • Power Conditioner for Brantz Tripmeters
    £36.31 ex. VAT

    Product description

    RetroTrip and International tripmeters require a stable voltage source to function properly. This Conditioner has been designed to provide this, especially if you car is fitted with a dynamo or is 6-volt. It connects to the battery...

    More Info
  • Prescaling Interface for RetroTrips
    £46.00 ex. VAT

    Product description

    To enable you to safely drive Retrotrips from digital pulse supplies found on vehicles fitted with digitally pulsed electronic speedometers in place of other sensors. Comes with instructions

    More Info
  • Propshaft Sensor for Tripmeters
    £66.00 ex. VAT

    Product description

    This sensor comprises two magnets that are fitted either side of the propshaft with the supplied clamps and a sensor that must be between 5 and 15 mm from the magnets. Thread is M8 x 0.75. Comes with full fitting instructions. You may...

    More Info
  • Retrotrip 2 Classique - Tripmeter
    £247.59 ex. VAT

    Product description

    Approved for many Historic or Retrospective rallies worldwide the Retrotrip 2 Classique is classed as an electro-mechanical tripmeter, and has twin displays, total and intermediate, which can be zeroed independently. The Retrotrip 2 is...

    More Info
  • Retrotrip 3 Classique - Tripmeter
    £327.70 ex. VAT

    Product description

    An evolution of the RetroTrip 2 Classique Tripmeter, this model comprises two separate tripmeters fed from a single sensor. One tripmeter drives the two counters on the top row, whilst a second drives the third readout at the bottom. The...

    More Info
  • Speedo Cable Sensor for Tripmeters
    £29.70 ex. VAT

    Product description

    This speedo cable-driven sensor is for use with both the International and RetroTrip range of tripmeters and also the Gaugepilot. Easy installation with the included intructions, involving cutting both the cable outer and inner and...

    More Info
  • Wheel Sensor for Tripmeters
    £29.70 ex. VAT

    Product description

    For use with Brantz RetroTrip and International Tripmeters, This almost universal 12mm diameter Wheel Sensor can be mounted on a suspension strut so that it picks up the bolt heads off the brake disc as they pass by. A minimum of 4 bolts...

    More Info

Brantz

In the sixties, serious competitors in rallying used trip meters which were 100% mechanical to improve their navigation and finish higher up the finishing order, and some rally regulations continue to allow only this type. However, many historic or retrospective rallies worldwide which require mechanical instruments have approved the RetroTrip trip meters made by Brantz. These incorporate electro-mechanical clicking digits and are calibrated to the car by operating switches on the unit. They are normally used with an electrical sensor on the speedometer cable or you can use a wheel or prop shaft sensor. Older cars with 6-volt electrics or doubtful 12 volt charging systems should use the power conditioner also listed here.

For modern rallies, we offer the Brantz International electronic trip meters which rely on an electrical signal which is then processed electronically. International trip meters have large light emitting displays, 15 mm (0.6 inches) tall. The Brantz International 1 is ideal for road rallying and club level stage events, while the Brantz International 2 offers a complete solution for the professional rally driver. The Brantz 2 'S' Pro has the addition of a highly accurate speedometer. They are calibrated electronically and are normally used with a wheel or prop shaft sensor.