Product description

Pair of Heavy Duty Axle Stands with a total capacity of 12 tonne capacity the pair. Minimum height 711 mm, maximum height 1270 mm....

Product description

Set of four Heavy Duty Axle Stands with a total capacity of 24 tonne. Minimum height 711 mm, maximum height 1270 mm....

Product description

Pair of Heavy Duty Axle Stands with a total capacity of 4 tonne the pair. Minimum height 305 mm, maximum height 510 mm....

Product description

Pair of Heavy Duty Axle Stands with a total capacity of 8 tonne the pair. Minimum height 510 mm, maximum height 760 mm.

Product description

High quality, with overload protection system. Has large stable base and notched saddle. Two piece handle. Minimum height 181mm, maximum height 345mm. As with all jacks, never work under an unsupported jack, always use solid supports,...

Product description

EZcarlift™ is the new standard of what a (home garage) car lift is all about! ­

It's safe, easy to use, compact, convenient, portable, versatile, and affordable.  Using the basic operation of the common...

Product description

Pair of Car Ramps, for driving your car onto. Platform width 180 mm and height 243 mm. Ramps are 1 metre long. Tested to 3,000 kg the pair...

Product description

Designed for motorcycles without a centre stand. Can also be used for lifting and lowering engines, gearboxes, axles etc. When closed height is only 140mm, raises to 450mm. Very useful

Product description

2 tonne capacity. Provides extra safety when locating awkward jacking points or when lifting one end of a car in one go

Product description

Part of E-Z Car Lift. Comprises two cross spacer bars, a drive bar and a slave bar, a set of wheels and everything you need to assemble the lift. Measure the width across the jacking points on your car and select the appropriate width...

Product description

Part of E-Z Car Lift. Comprises two cross spacer bars, a drive bar and a slave bar, a set of wheels and everything you need to assemble the lift. Measure the width across the jacking points on your car and select the appropriate width...

Product description

Part of E-Z Car Lift. Comprises two cross spacer bars, a drive bar and a slave bar, a set of wheels and everything you need to assemble the lift. Measure the width across the jacking points on your car and select the appropriate width...

Product description

Part of E-Z Car Lift. Comprises two cross spacer bars, a drive bar and a slave bar, a set of wheels and everything you need to assemble the lift. Measure the width across the jacking points on your car and select the appropriate width...

Product description

Part of E-Z Car Lift. Comprises two cross spacer bars, a drive bar and a slave bar, a set of wheels and everything you need to assemble the lift. Measure the width across the jacking points on your car and select the appropriate width...

Product description

Part of E-Z Car Lift. Comprises two cross spacer bars, a drive bar and a slave bar, a set of wheels and everything you need to assemble the lift. Measure the width across the jacking points on your car and select the appropriate width...

Product description

These are for use on the top of the lift's rubber pads mainly to protect sill panels etc. They will also provide additional space (gap) between the lift and the vehicle. The extra space between the car and the lift could also be utilized...

Product description

Comprises a set of four swivel casters for the lift as an alternative to the standard ones. Developed for single car garages but also for overcrowded garages. With these fitted you can drive the vehicle over the low profile Cross...

Product description

Comprises a set of four swivel casters, two of which have parking brakes on them. The phenolic casters are 150mm (6 in) diameter by 50mm (2 in) wide with roller bearings. They clip onto the legs of the lift and enable you to push the...