Sealed beam head light unit 7". 65/55 watt 12 volts. This unit has a side light window. LHD SB7029 but with a side light window
Sealed beam head light unit 7". 65/55 watt 12 volts. This unit has a side light window. RHD SB7014
7 inch steel headlamp backshell only, 54522342. All the necessary components to build your headlamps up are available separately.
Made of rubber, it fits between the backshell and the wing, This is the type for use with 3 adjuster type headlamps. 29mm wide. 554280
Steel Backshell for 7 inch 3-adjuster type headlamps 54522954. 7H6838
Retaining rim and seating rim set for 3 adjuster headlamps. This 2 part set 'sandwiches' the light unit to hold it and provides the mounting points for the adjuster screws. 554872, 17H5205
Set of three adjusting screws, washers, springs and plastic covers for 3 adjuster type headlamps and late type PF770 headlamps. Thread is 2 BA. You might need to file the screw heads down a bit to fit on some seating rims. 60600614,...
Light Unit only for the SLR700 and CLR700 Lucas 7 Spotlamp fitted to many cars in the classic period as shown in the picture which shows the whole lamp. This light unit uses Bulbholder 010.148 order separately if required.
Red Reflector in angled black rubber moulding, as fitted to late model MG TF, but ideal for wing mounting on any classic car. Reflector is 40 mm diameter & the rubber moulding is 73 mm diameter.
Headlamp rim as fitted to Aston Martin DB2/4. High quality reproduction or Lucas 553978, chrome plated on steel. Screw fitting. Measures 227 mm external diameter
Headlamp rim as fitted to Austin Healey 3000 BJ8. Chrome plated. Reproduction of Lucas 54522515 Screw Fitting. Measures 215 mm external diameter
Halogen Light Unit for H1 type bulb. On two lamp cars this is the inner main beam without sidelight. Suitable for RHD or LHD Drive. Made by Autopal. A matching outer light unit is also available.
Halogen H4 headlamp unit. On two lamp cars this is the outer main/dip beam with sidelight. Suitable for Right Hand Drive as the bulb dips to the left. Made by Autopal. A matching inner light unit is also available.
Plain glass light unit, RHD (dips to the left) without sidelight. slightly curved glass and fluted metal reflector which provides the focussing. Bulb shield in centre. E Marked. Supplied with dust cover at rear. For use with H4 Halogen bulb
Plain glass light unit, RHD (dips to the left) with sidelight facility. slightly curved glass and fluted metal reflector which provides the focussing. Bulb shield in centre. E Marked. Supplied with dust cover at rear. For use with H4...
Headlamp Visor to suit 5 3/4 in diameter headlamp. Fits under rim, no drilling. Sold singly.
Headlamp Visor to suit 4 1/2 in diameter headlamps. Fits under rim, no drilling
Bulbholder for BPF type headlamps. This bulb holder is of the 'push & twist' type, in that there are 3 small lugs inside which correspond to three lugs on the headlamp, allowing the cap to only fit in one position -...