Product description

Rectangular stainless steel base mounted lamp. Ideal for useas a reversing lamp where these were not previously fitted. Mounted via a single stud, and can be mounted whichever way up is desired. Rear foglamp is available in similar...

Product description

Supplied as a Reversing Lamp with 12 volt 21 watt festoon type single filament bulb. This lamp can be converted to a side lamp by fitting a 5 watt bulb. Matching stop/tail and flasher Lamps are also available. This lamp is a flat base...

Product description

With black plastic body and single hole for fixing to fairing or bracket. Amber lens is E marked and measures 46 mm x 61.5 mm. In addition the 26 mm depth of lens gives a good light from the side. Overall length 104 mm. Supplied with 12...

Product description

Product description

534296 Used to secure the chrome rim on Lucas S700 freestanding headlamps. Supplied with screw. For the rim refer to 553248/R. For the W clip that holds the light unit inside the rim refer to 504665. As fitted to MG TD. Also used on 5...

Product description

Chrome plated, 45mm long and 26mm wide. Fitted to many Lucas freestanding headlamps 532590

Product description

Chrome plated, 31mm long and 27mm wide. Fitted to many Lucas freestanding headlamps 509936

Product description

Reproduction chrome rim 553248 fits to Lucas S700 freestanding headlamps and motorcycle headlamps. It is retained at the top by a small clip and screw refer to 534296. As fitted to MG TD

Product description

As shown. Quality reproduction of the Rotax medallion. Chrome plated brass casting with lugs at the rear to peen over and secure as on the original parts. Please note that the hole in the headlamp is slightly smaller.

Product description

As shown. Quality reproduction of the Rotax medallion. Chrome plated brass casting with lugs at the rear to peen over and secure as on the original parts. Please note that the hole in the headlamp is slightly smaller.

Product description

As shown. Quality reproduction of the Rotax medallion. Chrome plated brass casting with lugs at the rear to peen over and secure as on the original parts. Please note that the hole in the headlamp is slightly smaller.

Product description

As shown. Quality reproduction of the Rotax medallion. Chrome plated brass casting with lugs at the rear to peen over and secure as on the original parts. Please note that the hole in the headlamp is slightly smaller.

Product description

Rubber Body only to fit the L489 sidelamp commonly used on early Morris Minor and series 1 Landrover.

Product description

Marketed by Rubbolite as a side marker lamp for trailers etc, this lamp is eminently suitable for use as a discreet flasher lamp on vintage and classic cars that were not supplied with indicators. A standard bulb ends up very close to...

Product description

Screw type headlamp rim catch. Used to secure the chrome outer rim on headlamps with steel backshells. Suitable for both 2-Adjuster and 3-Adjuster types, but not suitable for plastic backshells. A spring clip is also available....

Product description

As used on the SFT576  with Mounting Plinths 010.018 and 010.010. Plinth 010.010 is the taller and is for Rolls-Royce spot and fog lamps. Bolt length 108mm (4.1 in). 5/8 dia 26 TPI Can be cut down if necessary 503014

Product description

Sidelamp for single contact bulb. Can be fitted with a 5 watt bulb and used as a sidelight, or a 21 watt bulb and used as a reversing lamp. None 'E' marked lamp with clear lens Supplied with approximately 90cm of cable. The required bulb...

Product description

Sidelight bulb holder for headlamps that have a plastic reflector. NOTE : Some lamps with metal reflectors have a rubber grommet to retain the sidelight bulb holder - in these cases, use this holder for your side light bulb. A LED bulb...

Product description

Spare small side clear Lens for 'Divers Helmet' Rear Lamp 010.060 shown in picture. This clear Lens is for numberplate illumination and can be assembled either side of the 'Divers Helmet' Lamp. For red version refer to 010.473.

Product description

Spare small side red Lens for 'Divers Helmet' Rear Lamp 010.060 shown in picture. If you wish you can replace the clear lens with a red one.

Product description

As shown

Product description

Bracket to hold small spot or fog lamps onto a badge bar, fits 19 mm (3/4 inch) badge bar. You will need two to fit the pair of lamps 010.455

Product description

If you have trouble with vibration of your Auxiliary Lamps we offer these Stabiliser Bars. They require two holes in the lamp and two in the car. All metal. Length between centres can be adjusted from 120 to 175 mm. Sold as a pair

Product description

If you have trouble with vibration of your Auxiliary Lamps we offer these Stabiliser Bars. They require one hole in the lamp and one in the car. Length between centres 205 mm, but they can be cut down. Sold as a pair

Product description

These chrome plated brackets make it easier to mount accessory lamps such as SLR576 and SFT576. Bracket part fits behind the over rider or bumper with the lamp just outboard. This one is on the left hand side when seen from the front of...

Product description

These chrome plated brackets make it easier to mount accessory lamps such as SLR576 and SFT576. Bracket part fits behind the over rider or bumper with the lamp just outboard. This one is on the right hand side when seen from the front of...

Product description

Headlamp rim spring clip .Used to secure the push-on chrome outer rim on headlamps. This clip is for use on steel headlamp bowls, both 2 adjuster and 3 adjuster types.

Product description

Spring clip to allow a push-on outer rim to be used with a plastic headlamp backshell. A separate clip is available for steel backshells.

Product description

Lucas licenced reproduction of the Square 8 FT8 Fog Lamp which was fitted below the bumper on Rolls-Royce Shadows and Bentley T Types. With chromed body and black cover. E Marked and supplied with H1 type bulb fitted. A cover is also...

Product description

Lucas licenced reproduction of the Square 8 Spot Lamp LR8 which was fitted below the bumper on Rolls-Royce Shadows and Bentley T Types. With chromed body and black cover. E Marked and supplied with H1 type bulb fitted. A cover is also...

Product description

Square Halogen Headlamp Unit. Glass measures 10 x 6. Has provision for a sidelight in the rear. Believed to suit FORD cars and is possibly a N/S unit, although this is unconfirmed. Box is also marked LUB544, and article is opposite hand...

Product description

Square Halogen Headlamp Unit marked FORD. Model unknown. Lamp measures 10x 6. Has provision for a sidelight fitting on the rear. RHD UK spec lamp unit. Lucas New Old Stock. Limited number available.

Product description

Lucas style ST38. Originally this lamp was fitted to many cars in the vintage and post vintage period. This is a quality reproduction and provides a rear lamp, brake lamp and numberplate lamp. Diameter 90 mm x 63 mm deep. 70mm...

Product description

Lucas style ST38. Originally this lamp was fitted to many cars in the vintage and post vintage period. This is a quality reproduction and provides a rear lamp, brake lamp and numberplate lamp. Diameter 90 mm x 63 mm deep. 70mm...

Product description

For protecting 10 in diameter Headlamps. Hand made from spun brass wire. To fit these you will have to drill your headlamprims. Made to the original works pattern.

Product description

For protecting 12 in diameter P100 Headlamps. Hand made from s pun brass wire. To fit these you will have to drill your headlamp rims. Made to the original works pattern.