Basket is empty!

Headlamp - Parts (38 results)

Showing 1-36 of 38
Electrical
Lighting
Headlamps
Shop by Size
Shop by Brand
Shop by Price
  • 5 3/4 in Headlamp Retaining Rim 54524588
    £16.67 ex. VAT

    Product description

    Lucas 5 3/4" headlamp retaining rim 54524588, 37H7024

    More Info
  • 5 3/4 in or 7 in Headlamp Pilot Bulbholder for BPF Bulbs
    £6.50 ex. VAT

    Product description

    For sidelight/pilot bulb on BPF Headlamps.Uses LLB989 or LLB951

    More Info
  • 5 3/4 Inch Sealed Beam 60w/37.5w 12 Volt Light Unit SB5731
    £19.95 ex. VAT

    Product description

    Sealed beam head light unit 5 3/4". 60/37.5 watt 12 volts. This unit does not have a side light window. As Lucas SB5731 but without the pilot window. GLU135

    More Info
  • 7 " Headlamp Dust Excluder 552906
    £3.00 ex. VAT

    Product description

    Made of rubber, it fits under the headlamp rim to keep out dust. Fits most 7' headlamps 552906, 3H2962

    More Info
  • 7 in Headlamp 2-Adjuster Back Gasket - 28mm Wide 54521488
    £5.00 ex. VAT

    Product description

    Rubber gasket that fits between the backshell and the wing on 2 adjuster type headlamps. This gasket is 28mm wide. A wider version is avaialble should one be required. Fits with both plastic and steel backshells, 54521488, 13H565

    More Info
  • 7 in Headlamp 2-Adjuster Back Gasket - 32mm Wide 54521487
    £9.20 ex. VAT

    Product description

    Rubber gasket that fits between the backshell and the wing on 2 adjuster type headlamps. This gasket is 32mm wide. A narrower version is available should one be required. Fits with both plastic and steel backshells, 54521487,...

    More Info
  • 7 in Headlamp 2-Adjuster Backshell Assembly - Plastic
    £18.00 ex. VAT

    Product description

    Plastic Backshell Assembly for 7 in headlamps, Made by Wipac, this backshell comes complete with the lamp unit retaining rim (chrome on steel) and can be used with outer rims that are retained by either a screw or a spring clip. (Spring...

    More Info
  • 7 in Headlamp 2-Adjuster Backshell for Jaguar E Type S1
    £47.00 ex. VAT

    Product description

    Special steel Backshell for 7 in headlamps on Jaguar E Type Series I. The special feature of this backshell is the flattened or truncated section at the rear. Use in conjunction with the standard 2-Adjuster retaining rim and seating...

    More Info
  • 7 in Headlamp 2-Adjuster Retaining Rim - Chromed 54521913
    £11.00 ex. VAT

    Product description

    Chromed retaining rim for 2 adjuster type headlamps 54521913. Alternative to 010.376 which is satinless steel. If you also want the inner seating dish refer to 54058414

    More Info
  • 7 in Headlamp 2-Adjuster Retaining Rim and Seating Dish 54158414
    £14.42 ex. VAT

    Product description

    Chromed retaining rim and inner seating dish set for 2 adjuster headlamps, 54058414. This is the part of the 2-Adjuster headlamp in which the light unit is fitted

    More Info
  • 7 in Headlamp 2-Adjuster Screw Kit 60600427
    £3.75 ex. VAT

    Product description

    Set of two trimmer screws and inserts plus the spring that  goes between the inner seating dish and the backshell. This kit is suitable for steel backshells 60600427, BHM7058

    More Info
  • 7 in Headlamp Dust Cover for Halogen/UEC Light Units 54527337
    £4.41 ex. VAT

    Product description

    Made of rubber, this cover fits over the halogen bulbs to keep out dust. The cover pushes on before the plug on the wiring harness, which acts to retain the rubber cover. Fits both halogen H4 and UEC type light units

    More Info
  • 7 in Headlamp Gasket Narrow 2-Adjuster Plastic Backshells 554279
    £5.00 ex. VAT

    Product description

    Made of rubber, it fits between the backshell and the wing on 2 adjuster type headlamps with plastic backshells. This is the narrow gasket - 24mm, for a wider gasket refer to 010.606 - 28.5mm Lucas 554279

    More Info
  • 7 in Headlamp Gasket Wide for 2-Adjuster Plastic Backshells 554280
    £5.80 ex. VAT

    Product description

    Made of rubber, it fits between the backshell and the wing on 2 adjuster type headlamps with plastic backshells. This is the wide gasket - 28.5mm, for a narrower gasket refer to 010.605 - 24mm, 7H8338

    More Info
  • 7 in Headlamp Rim Screw
    £0.95 ex. VAT

    Product description

    Chromed round headed screw used to retain the finishing rim on 7 inch headlamps. Fits both plastic and steel backshells

    More Info
  • 7 inch Headlamp 2-Adjuster Retaining Rim - Stainless Steel
    £12.00 ex. VAT

    Product description

    Stainless steel retaining rim for 2 adjuster type headlamps. The part of the rim that shows is polished. Alternative to 54521913 which is chromed

    More Info
  • 7" 2-Adjuster Backshell - Steel 54522342
    £14.42 ex. VAT

    Product description

    7 inch steel headlamp backshell only, 54522342. All the necessary components to build your headlamps up are available separately.

    More Info
  • 7" Headlamp 3-Adjuster Back Gasket 554280
    £5.33 ex. VAT

    Product description

    Made of rubber, it fits between the backshell and the wing, This is the type for use with 3 adjuster type headlamps. 29mm wide. 554280

    More Info
  • 7" Headlamp 3-Adjuster Backshell (Steel) 54522954
    £18.53 ex. VAT

    Product description

    Steel Backshell for 7 inch 3-adjuster type headlamps 54522954. 7H6838

    More Info
  • 7" Headlamp 3-Adjuster Retaining Rims 554872
    £14.85 ex. VAT

    Product description

    Retaining rim and seating rim set for 3 adjuster headlamps. This 2 part set 'sandwiches' the light unit to hold it and provides the mounting points for the adjuster screws. 554872, 17H5205

    More Info
  • 7" Headlamp 3-Adjuster Screw Kit 60600614
    £5.95 ex. VAT

    Product description

    Set of three adjusting screws, washers, springs and plastic covers for 3 adjuster type headlamps and late type PF770 headlamps. Thread is 2 BA. You might need to file the screw heads down a bit to fit on some seating rims. 60600614,...

    More Info
  • BPF Headlamp Bulbholder 554691
    £11.38 ex. VAT

    Product description

    Bulbholder for BPF type headlamps. This bulb holder is of the 'push & twist' type, in that there are 3 small lugs inside which correspond to three lugs on the headlamp, allowing the cap to only fit in one position -...

    More Info
  • BPF Headlamp Bulbholder and Harness 54933718
    £12.00 ex. VAT

    Product description

    Bulb holder and harness  for BPF type headlamps. This bulb holder is of the 'push & twist' type, in that there are 3 small lugs inside which correspond to three lugs on the headlamp, allowing the cap to only fit in...

    More Info
  • Bulbholder for 5 3/4 inch and 7 inch Headlamp Sidelight
    £3.60 ex. VAT

    Product description

    Push fit into 14 mm diameter hole. Takes capless bulbs LLB297 or LLB501.

    More Info
  • Headlamp Backshell Assembly - 2-Adjuster - 7 inch - Plastic
    £19.90 ex. VAT

    Product description

    Plastic Backshell Assembly for 7 in headlamps, 2 adjuster type. This backshell comes complete with a retaining rim and rubber gasket for use between the bowl and the body. It can be used with outer rims that are retained by a screw...

    More Info
  • Headlamp or Flasher Relay Socket Kit - Right Angled
    £2.40 ex. VAT

    Product description

    If you would like to make up your own wiring harness to your headlamp try using this Socket Kit which fits Halogen H4 and UEC light units/bulbs. Supplied with the connectors. This kit can also be used with 2 and 3 pin flasher units

    More Info
  • Headlamp or Flasher Relay Socket Kit - Straight
    £2.40 ex. VAT

    Product description

    If you would like to make up your own wiring harness to your headlamp try using this Socket Kit which fits Halogen H4 and UEC light units/bulbs. Supplied with the connectors. This kit can also be used with 2 and 3 pin flasher units

    More Info
  • Headlamp Wiring Harness for Halogen & UEC Bulbs - No Sidelight
    £7.03 ex. VAT

    Product description

    Headlamp wiring harness for Halogen type light units without sidelight facility. This wiring harness has a grommet to push into the hole in your headlamp bowl. Other types are available for lamps with sidelight facility..

    More Info
  • Headlamp Wiring Harness for Halogen & UEC Bulbs - No Sidelight
    £3.66 ex. VAT

    Product description

    Headlamp wiring harness for Halogen type light units without sidelight facility. This one is ceramic and has short 100mm leads. Other types are available for lamps with sidelight facility

    More Info
  • Headlamp Wiring Harness for Halogen & UEC Bulbs (plastic reflector)
    £7.60 ex. VAT

    Product description

    Headlamp and sidelight wiring harness for Halogen type light units with plastic reflectors. This wiring harness has a grommet to push into the hole in your headlamp bowl and includes the sidelight bulb holder. Other types are available...

    More Info
  • Lucas 7 inch Headlamp 3-Adjuster Backshell Assembly without Light Unit
    £25.00 ex. VAT

    Product description

    3-Adjuster steel backshell complete with chrome retaining rim, adjusting screws and rim catch. Compatible with our range of 7 inch headlamps You will need to order a light unit, front finishing rim and gaskets separately if...

    More Info
  • Lucas 7 inch Headlamp Rim Catch TR type - Fits TR3 - TR6
    £4.75 ex. VAT

    Product description

    Used to secure the chrome outer rim on headlamps on TR3 - TR6. This marque specific rim catch is for use with steel backshells, both 2 and 3 adjuster.

    More Info
  • Lucas L564 Lens Only (Repro)
    £4.50 ex. VAT

    Product description

    Reproduction lucas l564 lens only

    More Info
  • Screw Type Headlamp Rim Clip
    £2.99 ex. VAT

    Product description

    Screw type headlamp rim catch. Used to secure the chrome outer rim on headlamps with steel backshells. Suitable for both 2-Adjuster and 3-Adjuster types, but not suitable for plastic backshells. A spring clip is also available....

    More Info
  • Sidelight Bulb Holder for Headlamp
    £4.90 ex. VAT

    Product description

    Sidelight bulb holder for headlamps that have a plastic reflector. NOTE : Some lamps with metal reflectors have a rubber grommet to retain the sidelight bulb holder - in these cases, use this holder for your side light bulb. A LED bulb...

    More Info
  • Spring clip to suit Lucas 7 inch Push-On Headlamp Rims
    £3.99 ex. VAT

    Product description

    Headlamp rim spring clip .Used to secure the push-on chrome outer rim on headlamps. This clip is for use on steel headlamp bowls, both 2 adjuster and 3 adjuster types.

    More Info

Headlamp - Parts