172mm diameter, moulded in plastic. Secured by grub screw onto a 1/4 in diameter shaft
152mm diameter, made in aluminium. Secured by grub screw onto a 1/4 in diameter shaft
1600mm long Cable with a loop at either end. This loop fits Water Valve 080.530 and 080.626. Some cars require a similar loop at the other end to fit a control lever or quadrant, which is what we have here. Alternatively, you can cut off...
As fitted to the A series engines in A40 Farina type and later to early Classic Minis. This is the straight type that will fit all 1275cc A series and most 998cc engines. Original Equipment Part No was 13H5506
For use with 5/8 in internal diameter pipe. Pull for OFF. For a cable to operate this valve refer to 080.549
For use with 5/8 in internal diameter pipe. Pull for ON, push for OFF. Shown in this picture with the control lever in the OFF position. For a cable to operate this valve refer to 80.549
Powerful 12 volt Fan Motor with 5/16 in shaft. A nice motor with cast end plates which can be wired up to rotate in either direction. Can be used to uprate the heater on the Jaguar Mk II. Use with Mounting Plate 080.547 and Fan 080.558
12 volt Fan Motor for Clayton Heaters. You can connect this up to rotate in either direction. (Please note that the supplier makes this from a motor with a double ended shaft by cutting off one end of the shaft)
12 volt Fan Motor for Clayton Heaters. You can connect this up to rotate in either direction
Sold by the metre.
Compared with 080.521 this is wire reinforced. Sold by the metre.
Suits 'Smiths' Blowers 080.232, 080.235. 080,.236 and 080.559 on Aston Martin, Austin Healey and others. Diameter equates to 82.5mm
Wire reinforced. Sold by the metre.
150mm overall diameter. Use with Motor 080.546 and Fan 080.558 on Jaguar Mk II and other cars. Coated steel
Made in metal, 135 mm wide. 1 3/4 in demist hose fits externally and 1 1/4 in demist hose fits internally. The 1 1/4 in will require sealer or tape to secure
Smiths metal Data Plate as shown. 90 mm x 20 mm. (You will need to stamp on a Code, Model and Voltage)
Copper. For use with 1/2' internal diameter pipe.