Air Filter Austin Healey
Product code: 015.151

Made by the original manufacturer to fit 1 3/4" SU carburettor for Austin Healey. No breather pipe. For version with breather pipe refer to 015.419.

Stamped SU 1/1/4 in
Product code: 015.161

Chrome Air Filter for 1 1/4" SU carburettor HS and HS2 as used on Morris Minor 1000, MG Midget Mk I, II & III, Triumph Vitesse 1600, Spitfire Mk I, II, III, IV and 1500. Has SU stamped on it.

Stamped SU 1 1/2 in
Product code: 015.162

Chrome Air Filter for 1 1/2" SU carburettor H4, HD4 and HS4 as used on Austin Healey BJ7 Mk II, Mini 1275GT, MGB, MGB GT. It has SU stamped on the front. The rear has the pattern of holes to suit SU's, the central hole being 35 mm (1 3/8") diameter

Stamped SU 1 3/4 in
Product code: 015.163

Chrome Air Filter for 1 3/4" SU carburettor. It has SU stamped on it. The rear has the pattern of holes to suit SU's, the central hole being 41.5 mm (1 5/8") diameter

Stamped SU 2 in
Product code: 015.164

Chrome Air Filter for 2" SU carburettor H8 & HD8 as used on Austin Healey BJ8 Mk III, Jaguar E Type 3.8 & 4.2, 420 4.2 litre, 420G, XJ6 2.8, 3.4 & 4.2, XJ12, Rover 2000TC. It has SU stamped on it.

Air Filter A-H Frogeye Sprite
Product code: 015.410

Made by the original manufacturer to fit 1 1/8" SU carburettor for Austin Healey Frogeye Sprite. No breather pipe. For version with breather pipe refer to 015.411.

Air Filter A-H Frogeye Sprite
Product code: 015.411

Made by the original manufacturer to fit 1 1/8" SU carburettor for Austin Healey Frogeye Sprite. With breather pipe. For version without breather pipe refer to 015.410.

Air Filter A-H Sprite
Product code: 015.412

Made by the original manufacturer to fit 1 1/4" SU carburettor for Austin Healey Sprite. No breather pipe. For version with breather pipe refer to 015.413.

Air Filter A-H Sprite
Product code: 015.413

Made by the original manufacturer to fit 1 1/4" SU carburettor for Austin Healey Sprite. With breather pipe. For version without breather pipe refer to 015.412.

Air Filter Austin Healey
Product code: 015.416

Made by the original manufacturer to fit 1 1/2" SU carburettor for Austin Healey. No breather pipe. For version with breather pipe refer to 015.417.

Air Filter Austin Healey
Product code: 015.417

Made by the original manufacturer to fit 1 1/2" SU carburettor for Austin Healey. With breather pipe. For version without breather pipe refer to 015.416.

Air Filter Triumph TR2
Product code: 015.418

Made by the original manufacturer to fit 1 1/2" SU carburettor for Triumph TR2. No breather pipe.

Air Filter Austin Healey
Product code: 015.419

Made by the original manufacturer to fit 1 3/4" SU carburettor for Austin Healey. With breather pipe. For version without breather pipe refer to 015.151.

Air Filter Daimler SP250
Product code: 015.420

Air Filter made by the original manufacturer to fit 1 3/4" SU carburettor for Daimler SP250. Has breather pipe.

Air Filter Jaguar XK Rear Carb
Product code: 015.421

Made by the original manufacturer to fit 1 3/4" SU carburettor for Jaguar XK (rear carburettor on right hand drive cars). No breather pipe.

Air Filter Jaguar XK/TR3/TR4
Product code: 015.422

Made by the original manufacturer to fit 1 3/4" SU carburettor for Jaguar XK, Triumph TR3 and TR4. No breather pipe

Air Filter Aston Martin DB4
Product code: 015.423

Made by the original manufacturer to fit 2" SU carburettor for Aston Martin DB4. No breather pipe.

Air Filter Austin Healey
Product code: 015.424

Made by the original manufacturer to fit 2" SU carburettor for Austin Healey. No breather pipe. For version with breather pipe refer to 015.425.

Air Filter Austin Healey
Product code: 015.425

Made by the original manufacturer to fit 2" SU carburettor for Austin Healey. With breather pipe. For version without breather pipe refer to 015.424.

Air Filter Jaguar C Type Rear
Product code: 015.426

Made by the original manufacturer to fit 2" rear SU carburettor for Jaguar C Type. No breather pipe. For Air Filter for front carburettor refer to 015.427.

Air Filter Jaguar C Type Front
Product code: 015.427

Made by the original manufacturer to fit 2" front SU carburettor for Jaguar C Type. No breather pipe. For Air Filter for rear carburettor refer to 015.426.

For SU 1 1/4" H2/HS2
Product code: 015.430

Chrome Air Filter for 1 1/4" SU carburettor HS and HS2 as used on Morris Minor 1000, MG Midget Mk I, II & III, Triumph Vitesse 1600, Spitfire Mk I, II, III, IV and 1500. This Air Filter is pierced for a breather tube from the Filter to the engine. A Breather Adaptor Kit contains both the adaptor and a blanking grommet for use when the breather pipe is not required, for this refer to 015.439. The central hole is 33 mm (1.3 in) diameter

For SU 1 1/4 in H2/HS2 Offset
Product code: 015.431

Chrome Air Filter for 1 1/4" SU carburettor HS and HS2 with offset intake as used on Austin Healey Sprite Mk I, IIA, III & IV, Mini Mk I, II, 850 & 1000, Cooper, Cooper S, 1275 Cooper, Mini 1275 & Clubman. This Air Filter is pierced for a breather pipe from the Filter to the engine. A Breather Adaptor Kit contains both the adaptor and a blanking grommet for use when the breather pipe is not required, for this refer to 015.439.

For SU 1 1/2" H4/HD4/HS4
Product code: 015.432

Chrome Air Filter for 1 1/2" SU carburettor H4, HD4 and HS4 as used on Austin Healey BJ7 Mk II, Mini 1275GT, MGB, MGB GT. This Air Filter is pierced for a breather tube from the Filter to the engine. A Breather Adaptor Kit contains both the adaptor and a blanking grommet for use when the breather pipe is not required, for this refer to 015.439. The hole in the centre is 35 mm (1 3/8") diameter

For SU 1 3/4" H6/HD6/HS6
Product code: 015.434

A pair of Chrome Air Filters for 1 3/4" SU carburettors H6, HD6 & HS6 as used on Austin Healey BJ7 Mk I, Rover 2200TC, Rover 3.5, 3500, Triumph TR3, 3a, 4 & 4a, MGC. These Air Filters are pierced for breather pipes for the Filter to the engine. A Breather Adaptor Kit contains both the adaptor and a blanking plug for use when the breather pipe is not required, for this refer to 015.439. The holes in the centres are 41.5 mm (1 5/8") diameter

For SU 2" H8/HD8
Product code: 015.435

Chrome Air Filter for 2" SU carburettor H8 & HD8 as used on Austin Healey BJ8 Mk III, Jaguar E Type 3.8 & 4.2, 420 4.2 litre, 420G, XJ6 2.8, 3.4 & 4.2, XJ12, Rover 2000TC. This Air Filter is pierced for a breather pipe from the Filter to the engine. A Breather Adaptor Kit contains both an adaptor and a blanking plug for use when a breather pipe is not required, for this refer to 015.439.

For Stromberg 150CD
Product code: 015.436

Chrome Air Filter for 1 1/2" Stromberg 150CD carburettor as used on Triumph Herald 13/60, 1300, Vitesse 1600 & 2000, GT6, 2000. This Air Filter is pierced for a breather pipe from the Filter to the engine. A Breather Adaptor Kit contains both an adaptor and a blanking plug for use when a breather pipe is not required, for this refer to 015.439.

For Stromberg 175CD
Product code: 015.437

Chrome Air Filter for 1 3/4" Stromberg 175CD2 carburettor as used on Triumph Stag, Jaguar E Type V12, Lotus Elan +2 (1968-9), S4, Europa Special. This Air Filter is pierced for a breather pipe from the Filter to the engine. A Breather Adaptor Kit contains both an adaptor and a blanking plug for use when the breather pipe is not required, for this refer to 015.439

For Solex & Zenith 52mm
Product code: 015.500

For Solex and Zenith 52mm carburettors. With circular upstand to fit over carburettor, this has an internal diameter of 52mm and is supplied with a worm drive hoseclip for making secure

For Autolite Single Choke
Product code: 015.501

For Autolite single choke carburettor Post 1970. With circular upstand to fit over carburettor, this has an internal diameter of 52.5 mm and is supplied with a worm drive hoseclip for making secure

Hoses for Oil Coolers
Product code: 015.514

Hoses are factory swaged to your requirements and for this we need the following information : a) Classic Black or Stainless Steel covered. b) 1/2 BSP or 5/8 BSP. c) Face to face length. d) Ends required, straight, 45 Elbow, 90 Elbow or 180 Elbow. e) Angle between ends if more than one elbow is specified. Angle is measured anti-clockwise as indicated on the drawing below:

Classic Helmet Black
Product code: 052.154/L

Retains all the original design features of the 1950's low dome racing helmet. These are hand built products of exceptional quality. Fibreglass composite shell retained using studs and nylon webbing with double D ring, leather interior with adjustable two tier cotton webbed harness, locked stitched using strong nylon thread. Other sizes and colours available, also with peak. However, Davida Classic Helmets do not comply with any current helmet safety standards

Classic Helmet White
Product code: 052.156/L

Retains all the original design features of the 1950's low dome racing helmet. These are hand built products of exceptional quality. Fibreglass composite shell retained using studs and nylon webbing with double D ring, leather interior with adjustable two tier cotton webbed harness, locked stitched using strong nylon thread. Other sizes and colours available, also with peak. However, Davida Classic Helmets do not comply with any current helmet safety standards

Classic Helmet Silver
Product code: 052.157/L

Retains all the original design features of the 1950's low dome racing helmet. These are hand built products of exceptional quality. Fibreglass composite shell retained using studs and nylon webbing with double D ring, leather interior with adjustable two tier cotton webbed harness, locked stitched using strong nylon thread. Other sizes and colours available, also with peak. However, Davida Classic Helmets do not comply with any current helmet safety standards

Classic Helmet Green
Product code: 052.158/L

Retains all the original design features of the 1950's low dome racing helmet. These are hand built products of exceptional quality. Fibreglass composite shell retained using studs and nylon webbing with double D ring, leather interior with adjustable two tier cotton webbed harness, locked stitched using strong nylon thread. Other sizes and colours available, also with peak. However, Davida Classic Helmets do not comply with any current helmet safety standards

Classic Helmet with Peak Black
Product code: 052.159/L

Retains all the original design features of the 1950's low dome racing helmet. These are hand built products of exceptional quality. Fibreglass composite shell retained using studs and nylon webbing with double D ring, peak, leather interior with adjustable two tier cotton webbed harness, locked stitched using strong nylon thread. Other sizes and colours available, also without peak. However, Davida Classic Helmets do not conform to any current helmet safety standards

Classic Helmet Black/Flame
Product code: 052.164/L

Retains all the original design features of the 1950's low dome racing helmet. These are hand built products of exceptional quality. Fibreglass composite shell retained using studs and nylon webbing with double D ring, leather interior with adjustable two tier cotton webbed harness, locked stitched using strong nylon thread. Other sizes and colours available, also with peak. However, Davida Classic Helmets do not comply with any current helmet safety standards

Classic Helmet Black/Yellow
Product code: 052.165/L

Retains all the original design features of the 1950's low dome racing helmet. These are hand built products of exceptional quality. Fibreglass composite shell retained using studs and nylon webbing with double D ring, leather interior with adjustable two tier cotton webbed harness, locked stitched using strong nylon thread. Other sizes and colours available, also with peak. However, Davida Classic Helmets do not comply with any current helmet safety standards

Classic Helmet Black/White
Product code: 052.166/L

Retains all the original design features of the 1950's low dome racing helmet. These are hand built products of exceptional quality. Fibreglass composite shell retained using studs and nylon webbing with double D ring, leather interior with adjustable two tier cotton webbed harness, locked stitched using strong nylon thread. Other sizes and colours available, also with peak. However, Davida Classic Helmets do not comply with any current helmet safety standards

Classic Helmet Red/White/Green
Product code: 052.167/L

Retains all the original design features of the 1950's low dome racing helmet. These are hand built products of exceptional quality. Fibreglass composite shell retained using studs and nylon webbing with double D ring, leather interior with adjustable two tier cotton webbed harness, locked stitched using strong nylon thread. Other sizes and colours available, also with peak. However, Davida Classic Helmets do not comply with any current helmet safety standards

Classic Helmet Black/Silver
Product code: 052.169/L

Retains all the original design features of the 1950's low dome racing helmet. These are hand built products of exceptional quality. Fibreglass composite shell retained using studs and nylon webbing with double D ring, leather interior with adjustable two tier cotton webbed harness, locked stitched using strong nylon thread. Other sizes and colours available, also with peak. However, Davida Classic Helmets do not comply with any current helmet safety standards

Classic Helmet/Peak Black/Flame
Product code: 052.170/L

Retains all the original design features of the 1950's low dome racing helmet. These are hand built products of exceptional quality. Fibreglass composite shell retained using studs and nylon webbing with double D ring, peak, leather interior with adjustable two tier cottton webbed harness, locked stitched using strong nylon thread. Other sizes and colours available, also without peak. However, Davida Classic Helmets do not conform to any current helmet safety standards

Bygone Era Redmarley Waxed Cotton Overtrousers
Product code: 052.125/L

These bygone Era Red Marley motorcycle overtrousers are styled in the original Belstaff/Barbour design. They are made in 8oz waxed cotton, double skinned at the front to keep out the wet. Lined in warm tartan material to just below the knee. Elasticated at the waist, secured with a metal zip and two plain antique brass press studs. The Bygone Era Red Marley motorcycle overtrousers allow easy fitting over boots and are secured with two plain antique brass press studs and leg buckle. Made in England. Size Large inside leg 32.waist when flat 33.32mimimum / 40maximum.

Classic Helmet Matt Black
Product code: 052.155/L

Retains all the original design features of the 1950's low dome racing helmet. These are hand built products of exceptional quality. Fibreglass composite shell retained using studs and nylon webbing with double D ring, leather interior with adjustable two tier cotton webbed harness, locked stitched using strong nylon thread. Other sizes and colours available, also with peak. However, Davida Classic Helmets do not comply with any current helmet safety standards

Brake Pads for Sprite/Midget/1500/Mini/TR7/Vauxhall
Product code: 065.901

Axle set of Brake Pads for the two front disc brakes of Austin Healey Sprite Mk II from HAN6 20792 when fitted with front disc brakes, Sprite Mk III, Sprite Mk IV, MG Midget Mk I from GAN1 13555 when fitted with front disc brakes, Midget Mk II, Midget Mk III and 1500, Mini Cooper 1275 July 1990 on, Mini 1275GT June 1974-80 with 12 in. wheels, Mini 1000 August 1984-92 all models, Mini 1.3 all models May 1992 on, Vauxhall Viva HB, HC 1200, 1300, 1600 with Lockheed brakes September 1966-79, Vauxhall Firenza 1200, 1300, 1400 with Lockheed brakes May 1971-73, Vauxhall Victor FD 1600, 2000, VX4/90 with Lockheed brakes August 1967-72, Triumph TR7 1976-81. Asbestos free. Original Equipment Part No. was GBP281

Brake Pads for MGA 1600 and Mk II
Product code: 065.902

Axle set of Brake Pads for the two front disc brakes of MGA 1600 and Mk II. These Brake Pads are asbestos free. Original Equipment Part No. was 8G8379

Brake Pads for MGB and Triumph 2000
Product code: 065.903

Axle set of Brake Pads for the two front disc brakes of MGB (not V8) 1962-81, Triumph 2000 to chassis 6435 1963-64 and Sunbeam Rapier 1959-63. These Brake Pads are made in England by MINTEX and are asbestos free. They carry a 12 month/15,000 mile guarantee under normal road use. Original Equipment Part No. was GBP202

Brake Pads for MGBGT V8, Triumphs, Vauxhalls & Rover
Product code: 065.906

Axle set of Brake Pads for the two front disc brakes of the MGBGT V8 1973-76, Triumph 2000 1969-77, Triumph 2.5, 2500 1969-77, Triumph Stag 1969-77, Triumph TR8 1980 on, Vauxhall Victor 1973-78, VX1800, 2300 1976-78, Ventora 1973-76 and Rover SD1 1976-82. These Brake Pads are made in England by MINTEX and are asbestos free. They carry a 12 month/15,000 mile guarantee under normal road use. Original Equipment Part No. GBP240

Brake Pads for Triumph, Ford's, Lotus's, Talbot Sunbeam etc
Product code: 065.907

Axle set of Brake Pads for the two front disc brakes of Triumph Spitfire Mk IV to chassis no. FH80000 and Spitfire 1500, Herald 1.1/1.3 '61-71, Triumph 1500, 1500 TC '70-76, Dolomite, including Sprint '72-80, Toledo Oct '72-76, Talbot Sunbeam '77-79, Lotus Europa 1.5/1.6/Twin Cam/Special '71-75, Super Seven 1.6 '71-75, Vauxhall Viva HB, HC 1800, 2000, 2300, Vauxhall Firenza 1800, 2000 May '71-73, Vauxhall Victor FD 1600, 2000, VX4/90 with Girling brakes August '67-72, Vauxhall Magnum 1800, 2000 '73-77, Ford Capri Mk 1 and 2 1.3L '69-Sept 1976, Ford Cortina Mk 2 1.3, 1.5, 1.6 Sept '66-70, except GT, Lotus, 1600E. Original Equipment Part No. was GBP574

Brake Pads for Triumph TR3/TR3A/TR4 and TR3B TSF series
Product code: 065.908

Axle set of Brake Pads for the two front disc brakes of the Triumph TR3 from chassis no TS13046 on (Girling system), TR3A to chassis no. TS56376 (wire wheels) TS56838 (steel wheels)-these cars have 11 in. discs, TR3A from chassis no. TS56834 (steel wheels)-these cars have 10 13/16 in. discs, TR3B TSF series also with 10 13/16 in. discs and TR4 to chassis no. CT4689 (wire wheels) CT4387 (steel wheels)-these cars have 10 13/16 in. discs. These Brake Pads are asbestos free. Original Equipment Part No. was GBP172

Brake Pads for Triumphs, Lotus, Rover, Sunbeam, Morgan etc.
Product code: 065.909

Axle set of Brake Pads for the two front disc brakes of the Triumph TR3B TCF series with 10 13/16 in. cross drilled discs, TR4 from chassis no. CT4690 (wire wheels) CT4388 (steel wheels) and TR4A-these cars also have 10 13/16 in. cross drilled discs, TR6 1969-72, GT6 1966-72, Vitesse 2.0 1966-71, Sunbeam Tiger 1964-67, Morgan Plus 8 3.5 1966-73, Lotus Elan 1.6 1969-72, Rover P6 2.0 SC 1966-72, Austin 1800 Mk II 1968 on, Wolseley 18/85 1967-69, Vauxhall Firenza 2.3 1973-76, and Ford Cortina E Mk II, Cortina GT MK II and Cortina Lotus Mk II all 1964-70.These Brake Pads are asbestos free. Original Equipment Part No. GBP114/GBP132

Brake Pads for Minis with 12 in. wheels 1984-91
Product code: 065.910

Axle set of Brake Pads for the two front disc brakes of Minis with 12 in. wheels made from 1984 to 1991. These Brake Pads are asbestos free. Original Equipment Part No. GBP307

Brake Pads for Mini Cooper 1961 to 1969
Product code: 065.911

Axle set of Brake Pads for the two front disc brakes of Mini Coopers 1961 to 1969. These Brake Pads are asbestos free. Original Equipment Part No. GBP102

Brake Pads for Mini Cooper S and Mini 1275GT
Product code: 065.912

Axle set of Brake Pads for the two front disc brakes of Mini Cooper S 1275 March 1963-1971 and Mini 1275GT October 1969 to June 1974 with 10 inch wheels. These Brake Pads are asbestos free. Original Equipment Part No. GBP103

Clayton Heater Fan Motor Single Shaft 1/4 in
Product code: 080.514

12 volt Fan Motor for Clayton Heaters

Short Dash Mounted (XK120)Interior Mirror
Product code: 090.100

Chrome finish with mirror 113 x 40 mm. Of those fitted to the Jaguar XK120 this is the shorter version only 55 mm overall height. For the taller Mirror refer to 090.102.

Dash Mounted Gold Back (MGA) Interior Mirror
Product code: 090.101

Arm has chrome finish, back of mirror has gold coloured finish. As fitted to MGA's and other cars in the 1950's and 1960's. Mirror is 127 x 50 mm and 91 mm overall height. For mirror with all chrome finish refer to 090.101CHROME.

Dash Mounted Chrome Back (MGA) Interior Mirror
Product code: 090.101/CHROME

Chrome finish, back of mirror also has chrome finish. As fitted to MGA's and other cars in the 1950's and 1960's. Mirror is 127 x 50 mm and 91 mm overall height. For the one with the gold back to the mirror refer to 090.101.

Tall Dash Mounted (XK120) Interior Mirror
Product code: 090.102

Chrome finish with mirror 113 x 40 mm. Of those fitted to the Jaguar XK120 this is the taller version 125 mm overall height. For the shorter Mirror refer to 090.100.

Adjustable Dash Mounted (XK140) Interior Mirror
Product code: 090.103

Chrome finish. Adjustable for height. As fitted to the Jaguar XK140.

Chrome Arm with Nut for Wing Mirrors - Short
Product code: 090.108

Includes spring back feature. Use with either round mirror head flat glass 090.112, round mirror head convex glass 090.111, rectangular mirror head flat glass 090.114, rectangular mirror head convex glass 090.113, E Marked mirror head flat glass 090.147 or E marked mirror head convex glass 090.146. Arm is chromed. Arm is chromed and is the type fitted to Rolls-Royces being shorter than the standard arm 090.110.

Chrome Arm with Nut for Wing Mirrors - Curved
Product code: 090.109

Includes spring back feature. Use with either round mirror head flat glass 090.112, round mirror head convex glass 090.111, rectangular mirror head flat glass 090.114, rectangular mirror head convex glass 090.113, E Marked mirror head flat glass 090.147 or E marked mirror head convex glass 090.146. Arm is chromed.

Chrome Arm with Nut for Wing Mirrors - Striaght
Product code: 090.110

Includes spring back feature. Use with either round mirror head flat glass 090.112, round mirror head convex glass 090.111, rectangular mirror head flat glass 090.114, rectangular mirror head convex glass 090.113, E Marked mirror head flat glass 090.147 or E marked mirror head convex glass 090.146. Arm is chromed. Picture shows arm with round mirror head.

3 Screw Adjusting Wing Mirror - Flat Glass - Left Hand
Product code: 090.123L

1950's to 1960's period accessory, they do not have the spring back feature. With flat glass 107mm diameter. Chromed. Handed as shown in the picture. For opposite hand refer to 090.123R. Can also be used as door mirrors

3 Screw Adjusting Wing Mirror - Flat Glass - Right Hand
Product code: 090.123R

1950's to 1960's period accessory, they do not have the spring back feature. With flat glass 107mm diameter. Chromed. Handed as shown in the picture. For opposite hand refer to 090.123L. Can also be used as door mirrors

Rectangular 'A' Post Fitting Vintage Mirror
Product code: 090.125

Rectangular 'A' post fitting with convex glass 142 x 65mm. Chromed

Door Mounting Mirror - Right Hand
Product code: 090.126

Chrome finish. Flat glass. Mounts onto right hand door. For matching mirror for left hand door refer to 090.135. These mirrors are typical of those used in the 1970's. For fitting this mirror to the MG Midget or early Mini refer to Mounting Kit 090.127, for later Minis refer to 090.348.

Overtaker Mirror - Seam Mounting for Mini (Flat Glass)
Product code: 090.128

Chrome mirror which clamps on to body seam of your Mini to give you a view of vehicles overtaking. Flat glass. Can be mounted on either side of the body of a classic Mini

Raydot Type Racing Mirror - Flat Glass
Product code: 090.131

Wing mounted racing type with single bolt fixing. Lightweight. Raydot copy. Flat glass 100mm diameter.

Chrome Racing Mirror - Flat Glass
Product code: 090.134

Chromed wing mounted racing type with two bolt fixing. Flat glass 100mm diameter. 50MM HOLE SPACING

Door Mounting Mirror - Left Hand
Product code: 090.135

Chrome finish. Flat glass. Mounts onto left hand door. For matching mirror for right hand door refer to 090.126. These mirrors are typical of those used in the 1970's. For fitting this mirror to the MG Midget or early Mini refer to Mounting Kit 090.127, for later Minis refer to 090.359.

Oval 'A' Post Fitting Vintage Mirror
Product code: 090.149

Desmo style 'A' post fitting with convex glass 102 x 75 mm maximum. Chromed. Mounting piece is 58 x 14 mm with 5mm holes with 42mm centres

Either Door Mounting Mirror - Flat Glass
Product code: 090.156

Chromed, not handed, round head, flat glass 107 mm diameter, with rubber gasket. Does not have the spring back feature.

3 Screw Adjusting Wing Mirror - Convex Glass - Left Hand
Product code: 090.173L

1950's to 1960's period accessory, they do not have the spring back feature. With convex glass 107mm diameter. Chromed. Handed as shown in the picture. For opposite hand refer to 090.173R. Can also be used as door mirrors

3 Screw Adjusting Wing Mirror - Convex Glass - Right Hand
Product code: 090.173R

1950's to 1960's period accessory, they do not have the spring back feature. With convex glass 107mm diameter. Chromed. Handed as shown in the picture. For opposite hand refer to 090.173L. Can also be used as door mirrors

Overtaker Rectangular Mirror (Flat Glass)
Product code: 090.176

Rectangular mirror that clamps to the glass channel to give you a view of vehicles overtaking. Flat glass 145 x 90mm.

Overtaker Round Mirror for Glass Channel (Flat Glass)
Product code: 090.177

Round mirror that clamps to the glass channel to give you a view of vehicles overtaking. Flat glass 105mm diameter.

Overtaker Oval Mirror for Glass Channel (Flat Glass)
Product code: 090.178

Oval mirror that clamps to the glass channel to give you a view of vehicles overtaking. Flat glass 125 x 85mm maximum.

Dash Mounted by single stud Interior Mirror
Product code: 090.198

Chrome and stainless steel, mirror size 120 x 65 mm, 118 mm overall height. Installed using single 8 mm stud at base.

Right Hand Door Mounting Mirror for Mini - Convex Glass
Product code: 090.222

A chromed racing door mirror specifically designed to look good on Minis. With convex glass. On late Minis you can take the original mirror off and fit this mirror using Mounting Kit 090.348. The left hand door mirror is 090.223.

Left Hand Door Mounting Mirror for Mini - Convex Glass
Product code: 090.223

A chromed racing door mirror specifically designed to look good on Minis. With convex glass. On late Minis you can take the original mirror off and fit this mirror using Mounting Kit 090.359. The right hand door mirror is 090.222.

Right Hand Door Mounting Mirror for Mini - Flat glass
Product code: 090.224

A chromed racing door mirror specifically designed to look good on Minis. With flat glass. On late Minis you can take the original mirror off and fit this mirror using Mounting Kit 090.348. The left hand door mirror is 090.225.