Austin Healey Bonnet Strap Lined with Chrome
Nickel plated. Use with 060.055.
Nickel plated, 136 mm long. Use with 060.057.
Stainless steel. T handle at the top. Use with 060.052
As shown, body diameter 1/2 (13 mm)
As shown, body diameter 5/8' (16 mm)
125 mm overall height (larger than 060.064). Sold as a pair
65 mm overall height (smaller than 060.065). Sold as a pair
Suitable for bonnet or boot. Slide plate is made from stainless steel. Sold as a pair
Heavier duty than 060.061. For bonnet or boot. Chrome plated steel. Sold as a pair
Pair of chromed Boot Hinges for classic Mini Saloon. Supplied with screws, studs and nuts
As fitted to many cars, including Triumph TR4, Spitfire Mk I, II, III, Herald, Nash Metropolitain, Standard 8 & 10. Sold as a pair
As fitted to many cars, including Lotus Elan, TVR, Hillman Imp, Reliant etc. Suitable for kit cars. Please note that nuts are not supplied with this hinge. The thread on the single stud that fits to the body is 5/16 in UNF (refer to...
Cable with T handle for releasing bonnet. Has pic of car with bonnet up on the handle. Length of cable 1.5 metres. Requires 9.5mm diameter hole in dash or bulkhead
Lacing for Cowls and Scuttles Shells (also described as Bonnet Tape), 13 mm (1/2 in) wide x 1650 mm (5 ft 5in) long. Complete with packet of rivets. Used between cowls/scuttles and bonnets since the Model T! Matches 060.215
Lacing for Radiator Shells (also described as Bonnet Tape), 9 mm (3/8 in) wide x 1525 mm (5 ft) long. Used between radiator shells and bonnets since the Model T! Matches 060.216
Leather Strap 38mm (1 1/2 in) wide with substantial brass buckle. It comes in two halves, the half with the buckle and the half with the holes to suit the buckle. As supplied the length is adjustable via the buckle from 2.055 metres (6...